365官方体育中文版-官网首页

24小时加固服务热线:134-02000333

新闻中心

公司专题 行业新闻 常见问题

低压注胶裂缝修补现在图

修补材料
a.       Patching Glue:
灌注胶:
Sikadur-52 will be adopted as patching glue in this work. Please find below for the detail information of it:
Sikadur-52将被采用作为灌注胶使用。Sikadur-52的详细信息如下:
 

现场施工图片

裂缝修补现场施工图片2

Sikadur-52
Sikadur-52 is two parts, solvent-free, low viscosity injection-liquid, based on high strength epoxy resin. It is used for substrate temperatures between +5°C and +30°C.
Sikadur-52 是一种双组份、无溶剂,低粘度高强环氧树脂基注浆液。Sikadur-52 可用于其温度在+5°C 和+30°C 间的基面上。
 
Use
用途
As an injection resin with good adhesion to concrete, mortar, stone, steel and wood, Sikadur-52 is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures. It not only forms an effective barrier against water infiltration and corrosion promoting media, but it also structurally bonds the concrete sections together.
作为一种与混凝土、砂浆、石头、钢材和木材有良好粘接性的注浆树脂,Sikadur-52 被用来填充和密封桥梁和其他土木工程建筑,工业和民用建筑结构中的空隙和裂缝,例如用于中的柱、梁、基础、墙、地面和蓄水结构等。它不仅可有效地防止水渗透和腐蚀介质的侵蚀,而且可作为混凝土构件间的结构粘接剂。
 
Characteristics and Advantages
特性
Solvent-free
Suitable for both, dry and damp conditions
Usable at low temperatures
Two grades for different climatic conditions (Normal and Long Potlife)
Shrinkage free hardening
High mechanical and adhesive strengths
Hard but not brittle
Low viscosity
Injectable with single component pumps
无溶剂
可在干燥和表面干燥情况下使用
可在低温下使用
针对不同气候环境有两个类型(一般的和长适用期的)
硬化后无收缩
高力学性能和粘接强度
硬而不脆
粘度低
用单组分泵即可注射

X

截屏,微信识别二维码

微信号:shjiagu

(点击微信号复制,添加好友)

  打开微信

微信号已复制,请打开微信添加咨询详情!
Baidu
sogou